Home > Plate bevellers > Hand-held bevellers > GLIXCLINE



  • - Unlimited thickness
  • - Various materials
  • - Can bevel radius
  • - Heaviest requirements
  • - High quality and smooth


GLIXCLINE is a light hand-held bevelling machine with electric drive for chamfering steel and cast iron. It can bevel plates of unlimited thickness with a maximum bevel width of 10 mm. The beveller is for the heaviest industrial requirements capable of continuous work when most bevelling requirements are close to its maximum.

This machine is used for bevelling strips and panels for energetic industry and chassis of trucks. The bevelling angle is between 15° and 45° and can be changed quickly and easily. Bevelling is done by a cutter with 9 changeable inserts sharp on all four sides. This cutter creates consistently wide bevels with high quality and smooth surfaces.

This machine can also be equipped with radius bevelling inserts which allows bevelling with a radius (R2-R4). Mirror finish can be achieved on most material types. Facing can be performed with accessories. Pipe bevelling can be performed with a special attachment. GLIXCLINE can bevel steel and cast iron. For bevelling aluminum, bronze and plastic there is GLIXCLINE L with 12 special inserts. 

Technical data

Maximum bevel width  10 mm
Bevelling angle  15° to 45°
Plate thickness Unlimited
Radius R2 – R4
Motor power 970 W
Motor idle speed 2 900 rpm
Voltage  240 V (single phase)/400 V (3-phase), 50Hz
Tooling 9 changeable inserts sharp on all four sides
Machine weight 11 kg
electric version
Do you have a question about this product?

Product images: